811 Units sold
SKU: EMCC58355
List Price: $661.93
Our Price:
$363.70
See Details
See Fitment
| Restricted States: | California, Colorado, New York, Maine | |
| Exhaust Certification: | EPA | |
| Exhaust Feature: | EPA OBDII APPROVED | |
| Exhaust Gasket and Hardware Included: | No | |
| Exhaust Material: | Steel and Ceramic | |
| Exhaust Mounting Hardware Included: | No | |
| Exhaust Oxygen Sensor Location: | Post Converter | |
| Exhaust Connection Type: | Clamp on | |
| Exhaust Engine Size: | 1.8L | |
| Exhaust Manifold Heat Shield Included: | Yes | |
| Exhaust Manifold Flange Stud Hole Quantity: | 2 | |
| Exhaust Manifold Bolt Hole Quantity: | 2 | |
| Exhaust Manifold Inlet Port Shape: | Round | |
| Catalytic Converter Body Shape: | Round | |
| Catalytic Converter Quantity: | 2 | |
| Catalytic Converter Inlet Quantity: | 2 | |
| Catalytic Converter Inlet 1 Type: | 2 Bolt Loose Flange With Spherical Flare | |
| Catalytic Converter Inlet 2 Type: | 2 Bolt Loose Flange With Spherical Flare | |
| Catalytic Converter Outlet Type: | Bolt-On | |
| Exhaust Overall Length: | 87.125 in | |
| Catalytic Converter Body Height: | 4.125 in | |
| Catalytic Converter Body Length: | 6.5 in | |
| Catalytic Converter Body Width: | 10 in | |
| Catalytic Converter Inlet 1 Inside Diameter: | 2 in | |
| Oxygen Sensor Ports: | 1 | |
| California Proposition 65: | Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov | |
| Exhaust Pipe Included: | Yes |
| Make | Model | Year |
|---|---|---|
| Pontiac | Vibe | 2009 |
| Pontiac | Vibe | 2010 |
| Toyota | Corolla | 2009 |
| Toyota | Corolla | 2010 |
| Toyota | Corolla | 2011 |
| Toyota | Corolla | 2012 |
| Toyota | Corolla | 2013 |
| Toyota | Matrix | 2009 |
| Toyota | Matrix | 2010 |
| Toyota | Matrix | 2011 |
| Toyota | Matrix | 2012 |
| Toyota | Matrix | 2013 |
Catalytic Converter
Distributed by AutoShack
- EPA Compliant
- Direct fit for installation onto existing exhaust system. 100% new.
- Pipe may be 2 pieces for quick installation.
- Made from premium quality materials to meet orginal specifications.
- Precious metals and large substrate minimize pollutants in your exhaust
- Quality inspected and tested - high heat resistance, low emissions and sounds levels
- Special design for maximum flow increases the power and performance of your engine
Legal Disclaimer
This product is not legal for sale or use in California, Colorado, New York and Maine due to state emissions regulations.
Caution:
- Converters are designed to last the life of a vehicle. If your converter needs to be replaced it may be due to an emissions error/problem in your engine tuning. Converters that overheat due to engine problems may turn blue or bronze. These problems must be corrected BEFORE installation of a new converter.
- Any modifications of any kind will void all warranty coverage for this item.
- Warranty is voided if catalytic converter substrate is melted or broken; this is due to an issue with the car itself and not the catalytic converter.
- Due to its size and shape it may encounter cosmetic flaws during its stocking and shipping process. The powder coating finish is designed to add shelf life by minimizing surface scratches which may deteriorate over time due to temperatures reached once in use.
- Products damaged as a result of abuse, misuse, improper repair, improper installation, alteration or modification will not be covered by the warranty.
- O2 sensors must be replaced when you replace the converter or warranty will be void. We have determined that failure of either the front O2 sensor (the front wide-band sensor), also known as an Air-Fuel Ratio Sensor or the read downstream sensor, can trigger a false P0420 code. Both sensors should be replaced with you replaced the converter.
Catalytic converters turn airborne pollutants into less harmful gasses and improve the efficiency of your vehicle. A compromised catalytic converter causes your engine to misfire, lowering your vehicles fuel efficiency and causing it to emit harmful pollutants.
Professional Installation is Highly Recommended.